Articles Related to anodization
Introduction to the special issue on ‘Nanostructures by Valve Metal Anodization’
With this special issue of JMSN we are pleased to present significant contributions to a fascinating topic in the field of materials nanostructing, which is the anodization of valve metals. By this treatment porous oxides of controlled geometry can be grown on the respective metal surfaces. To date, aluminum (Al) has been used most often, as confirmed in this special issue where nine out of ten contributions deals with its anodization.
Anodic Porous Alumina Array for Cyanine Fluorophore Cy3 Confinement
Self-organized anodic porous alumina films with hexagonal pore lattice have attracted a considerable attention for biological arrays and confinement of various organic probes dyes in solutions. A molecular structure with axial symmetry in bis-heterocyclic indole chains and conjugate system, such as cyanine fluorophore Cy3 dye, was investigated here with respect to its fluorescence when loaded in the anodic alumina pores.
The Effects of the Film Thickness and Roughness in the Anodization Process of Very Thin Aluminum Films
The anodization of aluminum foils having micrometer thickness is a common process and results in hexagonally self-ordered alumina membranes. However, anodic aluminum oxide (AAO) membranes fabricated from nanometer-thin films present new challenges to the anodization process, since aluminum films adheres poorly on supporting substrates and the smoothness of the film is highly related to the kind of substrate.
Fabrication of Ordered Arrays of Anodic Aluminum Oxide Pores with Interpore Distance Smaller than the Pitch of Nano-pits formed by Ion Beam Etching
We investigated a method for preparation of ordered nanopore arrays with the interpore distance of 60 nm by guided self-organization of anodic aluminum oxide with a prepatterned array of pits in the starting Al film.
Preparation of Large Area Anodic Alumina Membranes and their Application to Thin Film Fuel Cell
The design of an electrochemical reactor for the preparation of self-supported comparatively thin (up to 10 μm) and large area (up to 50 cm2) anodic alumina membranes is described allowing growth of porous alumina at high applied potential (up to 150 V) without burning.
Fabrication and Luminescence of Anodic Alumina with Incorporated Vanadyl Citrate Chelate Anions
Anodic aluminum oxide doped with vanadyl citrate chelate complex anions was formed by a two-step self-organized anodization in 2 wt. % sulfuric acid containing 0.04 M V2O5 and 0.08 M citric acid at voltage range 13-23 V, and at 0 and 15 oC. The combination of two temperatures and at least four voltages (depending on the applied temperature) was applied as the operating conditions of anodization.