Articles Related to nanowires
Ordered Growth of Anodic Aluminum Oxide in Galvanostatic and Galvanostatic-Potentiostatic Modes
The results are presented of obtaining anodic aluminum oxide with an ordered pore arrangement by employing two anodizing modes - galvanostatic mode and combined (galvanostatic + potentiostatic) mode, at high values of the current density and voltage. Use has been made of an oxalate electrolyte and a complex electrolyte comprising oxalic acid and phosphoric acid. Scanning electron microscopy has been used to investigate the surface morphology of the barrier and porous layers and to determine pore sizes and inter-pore distance.
Fabrication of Vertical Cu2ZnSnS4 Nanowire Arrays by Two-Step Electroplating Method into Anodic Aluminum Oxide Template
Vertical Cu2ZnSnS4 (CZTS) nanowire arrays have been synthesized via two-step electroplating method into anodized aluminum oxide template. For deposition of CZTS nanowires, anodized aluminum oxide (AAO) was used as the growth mask for the growth of the nanowires. AAO templates with hole sizes of 70 nm in diameter were used in the experiments.
Synthesis of BaTiO3 Nanowires via Anodic Aluminum Oxide Template Method Assisted by Vacuum-and-Drop Loading
In this paper, we report on the synthesis of BaTiO3 nanowires via the anodic aluminum oxide template method. To fill in the precursors of BaTiO3 into anodic aluminum oxide templates, the vacuum and drop loading method developed in our previous study was used. Ba(CH3COO)2 (barium acetate) and C12H28O4Ti (tetraisopropyl orthotitanate) were used as Ba and Ti sources, respectively. Anodic aluminum oxide membranes with the through-hole diameter of ~200 nm were used as the template for BaTiO3 nanowires.
